| 規格 SPECIFICATIONS | H-4515-NC | |
| 研磨範圍 Grinding Capacity | 工作物直徑 Standard grinding range (Dia.) | Ø1~Ø75 mm |
| 停止式最大長度 Max Infeed Length | 150 mm | |
| 砂輪 Grinding Wheel | 砂輪尺寸 Grinding wheel size (O.D. x width x I.D.) | Ø455 x 150 x Ø228.6 |
| 砂輪轉速 Grinding wheel speed | 45 m/sec | |
| 調整輪 Regulating Wheel | 調整輪尺寸 Regulating wheel size (O.D. x width x I.D.) | Ø255 x 150 x Ø127 |
| 調整輪轉速 Regulating wheel speed | 10 ~ 300 R.P.M. (無段Variable) |
|
| 調整輪傾斜角度 Regulating wheel tilt angle | +5° ~ -3° | |
| 調整輪旋轉角度 Regulating wheel swivel angle | ±5° | |
| 手輪 Handwheel Graduation | 上滑軌進刀手輪 Upper slide feed graduation | 每轉 0.4 mm//rev. 每刻劃0.02mm/graduation |
| 下滑軌進刀手輪 Lower slide feed graduation | 每轉 6 mm//rev. 每刻劃0.01mm/graduation |
|
| 修整進刀手輪 Trimming device graduation | 每轉 2 mm//rev. 每刻劃0.01mm/graduation |
|
| 下滑臺最小寸動進給 X-axis Min. Input Increment | 0.0005 mm | |
| 驅動馬達 Drive Motors | 砂輪馬達 Grinding Wheel Motor | 7.5 HP x 4P |
| 調輪馬達 Regulating Spindle Lubricant Motor | 3.5 kw 伺服馬達 Servo Motor | |
| 砂輪主軸潤滑馬達 Wheel Spindle Lubricant Motor | 0.75 kw | |
| 滑板潤滑馬達 Slide Lubricant Motor | 0.75 kw | |
| 冷卻液馬達 Coolant pump motor | 0.375 kw | |
| 機器尺寸 Machine Dimensions | 2460 x 1340 x 1650 mm | |
| 淨重 Net weight | 3600 kgs | |
| 毛重 Gross weight | 38500 kgs |
注：聯系我時，請說是在“傲立機床網”上看到的，謝謝！
