| 參數\型號 | CH6150B | |
| 加工能力 CAPACITIES | 床身上最大回轉直徑 Max.swing over bed mm | 500 |
| 刀架上最大回轉直徑 Max.swing over carriage mm | 290 | |
| 中心距 Center distance | 750\1000\1500mm | |
| 床身寬度 Bed width | 420mm | |
| 主軸 SPINDLE | 主軸孔徑 Spindle hole | Φ80mm |
| 主軸端部尺寸 Spindle nose | C6 | |
| 主軸錐孔 Spindle taper | MT6 | |
| 主軸轉速范圍（級數）Spindle speeds(Number) | 15-1600 rpm(18 Steps) | |
| 進給 FEEDS | 公制螺紋范圍（種數）Metric threads range(Kinds) | 0.5-240 mm(66 Kinds) |
| 英制螺紋范圍（種數）lnch threads range(Kinds) | 80-0.25/inch(49 Kinds) | |
| 模數螺紋范圍（種數）Moudle threads range(Kinds) | 0.25-120 mm (57 Kinds) | |
| 徑節螺紋范圍（種數）Diametral threads range(Kinds) | 160-7/16 D.P (50 Kinds) | |
| 周徑螺紋范圍（種數）After weeks thread range（Kinds） | 5-1/10 CP (31 Kinds) | |
| 拖架 CARRIAGE | 橫滑板行程 Cross slide travel | 290mm |
| 小刀架行程 Compound rest travel | 150mm | |
| 車刀桿截面尺寸 Cross-section size of toolshank | 25*25mm2 | |
| 尾座 JAILSTOCK | 尾座套筒錐度 Taper of tailstock sleeve | MT5 |
| 尾座套筒直徑 Dia.of tailstock sleeve | 75mm | |
| 尾座套筒行程 Travel of tailstock sleeve | 150mm | |
| 主電機 Main motor power | 7.5KW | |
注：聯系我時，請說是在“傲立機床網”上看到的，謝謝！
