本設備主要特征
電源變壓器、感應器、水冷系統統—設計制造成—套系統。系統具有縱向(沿床身軸向)運動、垂直于機床的進退運動、上升下降運動，感應器主運動掃描。
電源工作頻率10kHz-30kHz
Main characteristics of the equipment
A power transformer, an inductor and a water-cooling system are uniformly designed and manufactured into a set of system. The system can make longitudinal motion (along the vertical direction of a bed), advance and retreat motion vertical to the machine tool, as well as ascending and descending motion, and scans the major motion of the inductor.
Work frequency of the power supply: 10 to 30kHz
本設備主要由以下單元構成
1、超音頻感應加熱電源
2、水冷機組
3、感應器
4、三維運動機構
5、操作箱
The equipment mainly consists of the following units:
1. Superaudio induction heating power supply
2. Water-cooling unit
3. Inductor
4. Three-dimensional motion mechanism
5. Operation case
主要技術參數
縱向行程： 4m、8m、12m
縱向行進速廑： lOmm/分—400mm/分
橫向行程： 300mm
橫向調節線速度：20mm-lOOmm
升降高度行程： 600mm
感應器晨低高度：700mm
升降線速度(快速)：600mm/min
(微調)：20mm/5
Major technical parameters
Longitudinal stroke: 4m, 8m and 12m
Longitudinal travelling speed: 10 to 400mm/min
Transverse stroke: 300mm
Transverse regulating linear speed: 20 to 100mm
Lift height stroke: 600mm
Inductor ultra-low height: 700mm
Lift linear speed (high speed): 600mm/min
(Fine tuning): 20mm/5
注：聯系我時，請說是在“傲立機床網”上看到的，謝謝！
