| 主要配置與性能 |
| Main configuration and performance |
組合式高頻加工中心
Combination HF processing center
一拖二多功能組合高頻加工中心
1.可滿足軸類、齒輪類、盤類不同加工特性高頻熱處理
2.智能化一鍵開機，電源參數可記錄、存儲、打印
3.機電一體化造型，一臺電源，兩個不同特性的機床。構件防銹、防磁、防腐
4.冷卻介質流量、壓力自動控制
Multi-Function Combination HF Processing Center (two lathes actuated by one power supply)
1.Perform high-frequency heat treatment for shafts, gears and discs with different processing requirements
2.Intelligent one-key start-up function capable of recording, storing and printing power supply parameters.
3.Mechatronics modeling with components proof against rust, magnet and corrosion, including one power supply and two lathes
with different features.
4.Auto control of cooling medium flow and pressure
參數表示方法Representation for parameters
GGQFH2- L500×Φ60-Φ100×N8
GGQ100表示固態電源IGBT100KW,功率大小根據負載的大小而決定。
FH2表示復合一拖二（一臺電源，兩個機床）
L500×Φ60表示軸類工件直徑為60mm，長度500mm。
Φ100XN8表示Φ100的圓盤，8個單位
GGQFH2- L500×Φ60-Φ100×N8
GGQ100 indicates solid power supply IGBT100KW while the power level depends on the load.
FH indicates composite type with two lathes actuated by one power supply (one power supply and two lathes included)
L500×Φ60 indicates 60mm diameter and 500mm length for shaft piece.
Φ100×N8 indicates Φ60 disc and 8 stations.
注：聯系我時，請說是在“傲立機床網”上看到的，謝謝！
